Transforming an 80s Coffee Table into a Modern Scandinavian Beauty
Disclosure: This blog contains affiliate links. I will receive a commission for items purchased through these links at no extra cost to you. I appreciate your support. Please read all labels and follow all manufacturer safety recommendations when working with paints, stains, and other equipment
Today, I'm excited to take you on a journey as I transform this tired, old 80s coffee table into a stunning modern centerpiece that's sure to impress. So grab your tools and let's get started!
It all began when I stumbled upon this coffee table at a thrift store for a mere $20. Despite its outdated appearance and a few flaws, I saw its potential. Inspired by the sleek simplicity of Scandinavian design, I envisioned giving it a fresh, contemporary look combining inspiration from these two designer coffee tables.
Supplies
Surf Prep 5” Electric Ray (Use Code PRETTYDISTRESSED10 for 10% off your order)
General Finishes Water Based Stain (Natural)
General Finishes Water Based Stain (Antique Oak)
Wagner Flexio 3500 Or Wagner Flexio 590
Varathane Water Based Polyurethane SATIN -
The Inspiration
The Process
First things first, I had to address some structural issues. This table has a loose corner that needed to be fixed. After some careful disassembly and a bit of tinkering, I managed to tighten it up and it was good as new—crisis averted!
Next, I went to work removing the thick orangey varnish on the top of this coffee table. This color of stain was a signature finish in the 1980’s but it has got to go! I pulled out my carbide scraper to get rid of a layer of varnish and then went back over it with my Surf Prep Sander and an 80 grit sandpaper disc. The final step in removing the old finish was sanding it again using a 150 grit sandpaper so that it is nice and smooth.
I was drawn to this coffee table's curved edge, which reminded me of the beautiful fluted look of pole wrap. This bendable oak veneer material was perfect for achieving the modern aesthetic I had in mind. After measuring the coffee table and cutting the pole wrap to size using my mitre saw, I carefully adhered it to the table using a quick dry wood glue. I worked in sections to ensure a seamless finish. It was a bit of trial and error, but with some patience and a few adjustments, I got it just right.
I used my Bessey clamps to secure the pole wrap to the table and laid some old bathroom tiles on top to weigh it down so I don’t get any bubbling. I used my Ryobi orbital sander to shave off the end of the pole wrap so that I have a seamless and level finish.
I went over the pole wrap with my Surf Prep sander using a 150 grit sandpaper disc to make it nice and smooth. This step helps the wood stain to apply evenly. Then I went over the entire table with a. tack cloth to pick up any dust that was left behind.
Now we are ready to stain! For the stain color, I opted for a custom blend of natural and antique oak to achieve the perfect Scandinavian blonde hue. The result was a soft, warm tone that complemented the oak veneer beautifully.
I applied the stain using a staining sponge and then after I had the whole surface covered in stain, I went back in with a lint free cloth to wipe back any excess. For the places I had filled with wood filler, I used my artist brushes to stain the filler so that it would blend right in.
After allowing the stain to dry overnight, it was time to apply the topcoat for added protection and a glossy finish. Using my Wagner Flexio paint sprayer, I applied three coats of water-based polyurethane, allowing two hours of dry time in between to ensure an even coverage and a smooth finish. For this topcoat, the manufacturer recommends applying three coats for maximum protection and coverage.
Finally, after hours of hard work and meticulous attention to detail, the transformation was complete. This 80’s coffee table now has a sleek, modern look that would be right at home in any contemporary space.
This project had challenged me in all the right ways, pushing me to think creatively and problem-solve along the way. This $20 coffee table now looks like a high end piece- but I didn’t have to break the budget to achieve the look!
Whether you're a seasoned DIYer or a newcomer to the craft, I hope this project has inspired you to roll up your sleeves and tackle your own furniture makeover. With a little creativity and a lot of elbow grease, anything is possible. You can watch the full makeover on my YouTube channel.
I will be back again soon with another makeover for you, until then, happy flipping!